Single Sided PE Foam Tape SSP-50MS

Product Description:

General Information of Single Sided PE Foam Tape SSP-50MS 

1. Single sided PE foam tape is with hot melt adhesive. Solvent based acrylic adhesive is also available as per customer's requirement.

 2. There are three kinds of release liner: without liner, PE release film & release paper.

 3. The foam is of white color and black color. Usually the PE release film is of red color, green color and blue color. The release paper is of white color and yellow color. So, you can match the foam & the release liner as you like, such as black PE foam wihtout release liner, black foam + red PE release film or white foam + white release paper.

 4. Different foam density available, such as 32kg/m3 (30expansion), 64kg/m3 (15expansion) & 96kg/m3 (10expansion).

 5. Single sided PE foam tape is used for auto trim attachment, signs, furniture industry, cushioning, sealing and so on.

 6. Two standard ways for cut roll packing: one roll per shrink & one roll per plastic bag. We can also offer special packing as per customer's requirements, such as label, core printing and sticker.

CONSTRUCTION of Single Sided PE Foam Tape SSP-50MS

Backing: White/Black PE Foam

Adhesive: Hot melt adhesive

Liner: White release paper

TYPICAL PHYSICAL PROPERTIES of Single Sided PE Foam Tape SSP-50MS

Total Thickness (adhesives + backing): 5.0 mm

Density: 32kg/m3

Initial tack: 6# steel ball

Holding power (hrs): >20h

Temperature resistance: 80℃

Elongation: 100%

Remarks of Single Sided PE Foam Tape SSP-50MS

The data above are typical results and subject to change without notice.

1. Tolerance: Weight and Thickness: ±10%; Width: ±3mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

1. The products should be stored at room temperature and be kept away wet and/or heat source.

2. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

3. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.