Polyester Mat Used For SBS/APP Waterproof Membrane

Loading Port:Shanghai

Payment Terms:TT OR LC

Min Order Qty:2000 m²

Supply Capability:200000 m²/month

Product Description:

Product description

‍

Polyester Mat Used For SBS/APP Waterproof Membrane take the “Skin” type waterproof thought, according to the features of construction site, on the basis of width elastomeric modified bitumen waterproofing membrane, combining with features of wet-application self-adhesive membrane, use advanced equipment to produce 2 meters width that WP-SBS wet-application width elastomeric modified bitumen waterproofing membrane (Hereinafter referred to: WP-SBS membrane).WP-SBS is made of bitumen modified with Styrene-Butadiene- Styrene (SBS)as dipping and painting. Its upper surface covers PE membrane and color sand or schist, and lower surface is made of isolation material. Products correspond to the national standards GB18242-2008(elastomeric modified bitumen waterproofing membrane), paste by cement or cement mortar, and construct on the wet base, achieving tight and full adhesion with substrates, eliminating fluid-channeling layer, all above contribute to making a reliable “Skin” type waterproof system, which is a breakthrough innovation in ordinary modified bitumen membrane.

Packaging & Shipping

1. Different types and specifications of the product should be piled up respectively, not be mixed.
2. Avoid sun and rain, pay attention to ventilation. Storage temperature should not be higher than 50°C.

3. Membranes should be flat during transport and storage, flat stacking height not more than four levels. Prevent tilt or pressure during transportation, sealed by the felt cloth if necessary

4. Under the normal storage and transport conditions, storage period is one year from the date of production.

Advantagee

1. 2m width, Reduce Overlap

2. Simple and Efficient Construct, Greatly Saving Construct Period

3. Adhesive Reliable, Avoid Fluid-channeling

4. Advanced Production Line

5. Excellent Comprehensive Physical Properties

6. Stable Dimension

7. Wide Adaptability of Facing Material

Application method

1.Make sure the roof deck smooth ,clean and dry(Moisture<9%),then apply the surface of roof deck homogeneously with a kind bitumen paint till dry to start application.

2.There are two methods in application:

One way is by heating and melting method---Heat the polyethylene film of the membrane and roof deck surface by heating and melting method to be nearly melted (not flowing),then install the membrane fully bonded to the roof deck with overlaps of 5-10cm.

The other way is by cold adhesive method---Pour the cold adhesive homogeneously on the roof deck then roll the membrane to install it to be fully sticked to roof deck.

By heating and melting method and by cold adhesive can be used in alternation in application as requested.

3.After application ,a full serious inspection is required to make sure no air bubble ,no fold,no falling away etc to guarantee the waterproof life.

Our Services

1.If you need some advises for the waterproof construction, we have the best engineer to serve you.

2.We send the free samples to you by freight collect.

3.We will guarantee the quality and the competitive price.

4.We will give you the best packaging and safe shipping.

5.If any problem, we will always be right here waiting for you.

Storage:

Different types or specifications of products should be separated, not mixed.

Keep it dry and ventilated, protected from the sun or rain.

Storage temperature should never be higher than 45 °C. Pile up the membranes flatwise whose stockpile height never exceeds five layers. One layer is guaranteed if it is placed vertically.

Prevent it from inclination or In the process of transportation, it should be lying in case of inclination or lateral pressure. If necessary, cover it with felt-cloth.

Storage time is at least one year from manufacture date on if the product is under normal operation of storage.

Technical Parameters

Item		Index
Item
1	Thickness of resin layer of the middle fabric ,mm≥		-	-	0.40	0.40	0.40
2	Tensile performance	Max tensile strength,N/cm ≥	-	120	250	-	120
		Tensile strength,NPa ≥	10	-	-10	-	-
		Max elongation% ≥	-	-	15	-	-
		Breaking elongation % ≥	200	150	-	200	100
3	Heat treatment size change rate%≤		2.0	1.0	0.5	0.1	0.1
4	Cold bonding		-25°c No cracks
5	Watertightness		0.3mPa,2h waterproof