Product Description:

1  PRODUCT PHOTO-ELECTRIC CURTAIN WALL

The panel of this product is laminated glass embedded with photo-electric battery modules, which are connected with retroaction device to form a solar dynamoelectric system. This product is a new type building curtain wall integrated with solar dynamoelectric technology and curtain wall technology.

2  EXTENT OF APPLICATION

This product is applicable for building façade, roof and canopy.

It can convert solar energy into electric power which can be used by people through surface and space of building. It is a photo-electric integrative energy-saving product.

3  PERFORMANCE AND INDEX

3.1 This product can apply different structural style and decorative effect according to different demand of clients. It can also realize the function of envelop, thermal insulation and sound isolation of traditional curtain wall.

3.2 Wind loading capacity, air tightness and water tightness must be determined in accordance with correlative national specification.

3.3 This product can convert solar energy into electric power. The conversion ratio is 10～15%. The dynamoelectric power at design peak value is 0.10～0.15kW/ m²，Export frequency is 50±0.5Hz，Voltage is 220±10%V，Wavy curve is standard sine wave，The distortion degree of the wave shall not exceed 5%.

4  MAIN FEATURES

This product can turn solar energy into electric power through  photo-electric battery by means of photo-electric effect. As a type of “Green Façade”, it can not only realize the purpose of decoration and envelop but also produce electric power to achieve Environment-protection and Energy-saving.

The dynamoelectric system of this product can be connected with civic electric web to provide electric power for the buildings. In the night or rainy days, the system this system will be shut off automatically and turn to civic electric supply web.

5  DESIGN OUTLINE

5.1 The selection of this product is the same as traditional curtain wall product. The architectural function and elevation effect shall be taken into account.

5.2 This product should be installed at the location where the sunlight can irradiate directly onto it chronically. According to the location of building, it is favorable to make the angle of incidence of sunlight smaller. The design of this product is intended to be convenient for maintenance and cleaning.

5.3 The glass panel battery of this product can be the compound of monocrystal line silicon, polycrystalline silicon and amorphous silicon. Among them, the conversion ratio of monocrystal line silicon is the highest, the next is polycrystalline silicon, and the lowest is amorphous silicon.

5.4The outer layer of the photo-electric curtain wall panel is super-white low- iron toughened glass and the inner layer is toughened glass.

5.5 The deflection of the glass should be restricted in the design.

5.6 Automatic switch device should be designed for the combined web between dynamoelectric system of photo-electric curtain wall and civic electric supply system.

6. CONSTRUCTION OUTLINE

6.1 Installation conforms to the requirement of JGJ102 and JG3035.

6.2 The conductor strip between batteries should be orderly, free of welding dregs and rupture.

6.3 The location of photo-electric curtain wall panel should be strictly according to the requirement of design to ensure the correct position of anode and cathode of photo-electric battery.

6.4 The installation of electric system should be in accordance with design drawings and the requirement of JGJ/T16.

6.5 The layout of cables should be reasonable and easy to  repair.

6.6 The start-up and debugging of photo-electric curtain wall should be completed by professionals. The operational regulation must be strictly carried out in the process of usage.

Detailed maintenance booklet should be provided.