Pedestal

Product Description:

Pedestal for Raied Floor:

High quality, galvaized steel ,used for raised access floor adjustable ,any height can be made.

1.This kind of the pedestal`s height could be 35mm ---150mm .

2.The best height is 50 mm

3. with or without square tube stringer steady connect the system

4.Save the space of the room.

Product Description of Pedestal

Cross Head Pedestal features three key pieces: an aluminum cross head, a solid steel rod, and a base plate. The cross head is fixed to a M18 or a M20 solid steel rod which is welded to the base plate, which is normally 100mm square. There are two options for securing the base plate to the sub-floor. One can either screw bolts into the sub-floor in the corner-holes provided or use adhesive. For greater height you can use a steel column in place of the solid steel rod. This allows for the option of raising your floor system to a higher than standard level. The steel column comes in a range of thickness and height (Thickness:1.2mm-2.5mm, Diameter 22mm-50mm) and provides greater load bearing capacity.

Finished Floor Height: 80mm - 1500mm. Each access floor pedestal allows for approximately 15mm-25mm height adjustment.

Floor Pedestals Coating: Galvanized or an Electrophoretic coating

Performance Selection Chart

Item	FFH(mm)	Horizntal Load (N)	Vertical Load (18KN)	Pedestal head	Screw Rod	Pedestal Tube	Pedestal Base
CL-PDT 80~150	80~150 +/-15	500	Did Not Collapse	70x70mmCross  Aluminum	M18 Or M20	/	100x100mm
CL-PDT 200~500	200~500 +/-25	500	Did Not Collapse	70x70mmCross  Aluminum	M18 Or M20	Dia. 22 or 25mm	100x100mm
CL-PDT 550~800	550~800 +/-25	500	Did Not Collapse	70x70mmCross  Aluminum	M18 Or M20	Dia. 32mm	100x100mm
CL-PDT 850~1500	850~1500 +/-25	500	Did Not Collapse	70x70mmCross  Aluminum	M18 Or M20	Dia. 38mm	120x120mm