Loading Port:Wenzhou
Payment Terms:TT OR LC
Min Order Qty:1 set
Supply Capability:10 set/month
Paper Bag Making Machine With Flexo Printing Machine
1.Product introduction:
This machine is suitable for printing such packing materials as polyethylene,polypropylene plastic bag,cellophane and roll paper,etc.And it is a kind of ideal printing equipment for producing paper packing bag for food ,supermarket handbag and clothes bag,etc.
2. The main features:
1. Take it easy, accurate color, long life.
2. Use motors, variable frequency speed control, saving electricity, small running fluctuations.
3. Off printing roll automatic stop the ink-running motor, and up-printing roll automatic start running the ink.
4. Use special synchronous belt drive, accurate printing size.
5. Two sets of heating devices, including central heating and constant temperature control system for group control.
6. Low-roller special steel processing, and special process, and plating thickness of 0.1mm protective layer of hard chromium.
7 Alloy roll with hard oxidation, treating by dynamic balance, static balanced.
8 With cold wind bellows, and can effectively prevent produce with ink adhesion after printing
9. Print produce are clear and good arrangement quality.
10. Bearing: NSK, Japan Brand, Germany ASNU aluminum alloy roll
3. Main parameter:
MODEL: | CMAX-886-600, CMAX-886-800, CMAX886-1000,CMAX886-1200 etc. |
Printing Material: | Plastic film OPP:20~80μm,BOPP:18~80μm,PE:35~100μm, NY:20~50μm,PET:12~60μm,CPP:20~60μm, paper: 20~150g/m2 |
Machine color: | 6 Color |
Max. Material width: | (650mm up to 1650mm, width size depends on client need) |
Max. Printing width | (550mm up to 1550mm, width size depends on client need) |
Max.printing length: | 200mm~1000mm |
Max. Machine speed: | 180m/min |
Max. Printing speed: | 30-150m/min |
Register precision: | Crosswise:±0.20mm;Longitudinal:±0.20mm |
Plate thickness: | Resin 2.28mm |
Double tap thickness: | 0.38mm(3M) |
Printing cylinder on machine: | 40cm/ 1 set |
Machine outside: | 5.4m(L)×2.0m(W)×3.4m(H) |
Machine total power: | 45Kw |
Voltage: | Voltage 380V, 3 PH, 50 Hz |
4. Detailed parameter:
4.1) Double unwind unit:
Max. unwind diameter | Φ800mm |
Unwind Way | Center unwind, with 10KG powder magnetic and auto tension control 2pcs |
Tension precision | ±0.3kg |
EPC System for unwind | 1pcs |
Unwind material holder | By air shaft , 2 pcs |
Unwind web cylinder | Φ76mm (inner diameter) |
4.2) Printing Unit:
Principle of Work | Belt Drive |
Suitable Printing Ink | Water-based ink or Oil-based ink |
Material of Plate | Resin or Rubber |
Constitution of Printing | Chrome plated roller, Rubber roller, Anilox roller, Plate cylinder |
Anilox roller | High speed machine:ceramic anilox roller (100-1000lpi), chamber doctor blade for 30-150m/min |
Printing Pressure | Mechanical adjust |
Color register type | By Manual |
Printing plate lifting system | Automatic Hydraulic cylinder control roll up and down |
4.3) Heating and Drying Unit:
Dryer | Electrical heat drying |
Blower | 4kw x 1pcs |
Double Blower way circle | Centralized heat, exhaust gas pumpback |
Power of Heating | 32 kw |
4.4) Double Rewind Unit:
Max. rewind diameter | Φ800mm |
Rewind Way | Centre rewind; |
Tension control system | Automatic tension control 2pcs |
Rewind material holder | By air shaft , 2pcs |
Rewind motor | 1.5Kw, Taiwan motor |
Rewind web cylinder | Φ76mm (inner diameter) |
5.Optional parts which extra cost buy:
NO. | Goods of Descriptions |
1 | Printing cylinder which use on flexographic printing machine |
2 | Corona treatment |
3 | Monitor system (also called image inspect device): screen+camera+controller |
4 | Pate mounting machine(easier to mount plate) |
5 | Plate making machine |
6 | Anilox roller cleaning machine ( especially client buy machine for paper printing) |
7 | Ink viscosity measurement ( 1 color need 1pcs) |
6.Product show:
7.FAQ:
1.Q: How about the after service?
A: We have a strong team, special for after service. We can arrange engineers to do service for you.
2.Q: Are you factory or trading company?
A: We are a factory in this field nearly 20 years.
3.Q: Where is your factory located? How can I visit there?
A:Our factory is located in Beijing City, China, near to the Beijing airport. You can fly to Beijing airport directly.
4.Q:How does your factory do regarding quality control?
A:Quality is priority. We always attach great importance to quality controlling from the beginning.
5.Q: why choose CNBM International Corporation?
A: We are one of leader in this field(in China). Our quality products and service have enabled us to expand our market from china to more than 60 countries.
Welcome to visit us and contact us for any problems!
