JSB-1200 Infusion Pump

Features

1. Can be used for all standards of IV sets.
2. Automatic Calibration for IV sets.
3. Three working modes: Rate control mode, Time control mode and volumetric mode.
4. Built in rechargeable battery (Lithium-ion polymer battery).
5. Spec of the fuse: F1AL /250V, two (inside).
6. 8 hours internal Lithium-ion polymer battery backup.
7. Alarm functions: occlusion, empty bottle, low battery, rate error, end of infusion, door open, air in line etc.
8. Three levels of the occlusion limited pressure: high, middle and low.  
9. Three levels of alarm sound: high, middle and low.  
10. The infusion pump goes into KVO mode automatically as infusion is completed.
11. Purge and Bolus functions
12. Waterproof class: IPX4

Technical Specification

1. Flow range: 1.0～99.9ml/h, 0.1ml/h increment, 100～1200ml/h, 1ml/h increment;
or 1～400drops/min, 1 drop/min increment.
2. Flow precision: ± 5%
3. Target Volume: 0～9999ml, 1ml increment
4. Time Limit Range: 1～1999min, 1min increment
5. Purge Rate: 600 ml/h.
6. Bolus : Adjustable from 10～1200ml/h, in steps of 0.1ml/h (flow rate < 100ml/h) and 1ml/h(flow rate > 100ml/h)
7. KVO rate    : if the flow rate ≤10 ml/h, KVO is 1ml/h. Otherwise KVO is 3ml/h.  
8. Power supply: AC100～240V, 50/60Hz, Internal Lithium-ion polymer battery: DC 11.1V, ≥1600mAh. The battery backup is approx. 8 hours (when using a, fully charged battery and running at 20 drops/min with any standard IV Set).
9. Power consumption: ≤25VA
10. Class: I
11. Type: CF  
12. Size: 125mm × 125mm × 230mm
13. Net weight: approx. 2.2kg
14. Operating condition: Ambient temperature: 5~40 degree C,  
     Relative humidity: 20～90%
15. Storage condition: Ambient temperature: -10～55degree C
     Relative humidity : 10～90%.