Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:1001 kg
Supply Capability:1000 kg/month
Huitian 4120Q Double component Silicone Potting Sealant
Product Features:
Ø Double component, condensation type.
Ø Ethyl alcohol released after curing, non-corrosive to electronic componentsØ Room temperature curing.
Ø High adhesion to all electronic components except for those made of PP&PE.
Ø High performance on insulation, damp proofing, vibration resistance, chemical resistance, electric leakage resistance.
Ø High & low temperature resistant
Ø No need to add primer coating before use
● Main Applications:
Ø For the potting of inside and outside LED displays.
● How To Use
Ø Before use, stir component A by hand or machine properly, keep component B sealed in the bucket and shake the bucket adequately.
Ø Check whether it’s adhering to Applied Materials theoretically.
Ø Mix component A and B with the mix ratio A:B=10:1 by weight. beforehand simple tests are requested if you need to change the mix ratio.
Ø Vacuum defoaming is not necessary if the potting thickness is below 5mm,but it is requested if the thickness is more than 5mm.
Ø Heating curing is unsuited, or pinholes and blisters will occur.
Ø Long-term exposure of component B in the air is unsuited
● Properties:
Item | Unit | Typical Value | ||
Item No. | 4120Q | |||
Color | Component A | Black | ||
Component B | Translucent | |||
Component of Basic Materials | ||||
Density (25℃) | Component A | g/cm3 | 1.13 | |
Component B | 0.95 | |||
Viscosity (25℃) | Component A | mPa*s | 1800 | |
Component B | 15 | |||
After Mixed | 1200 | |||
Mix Ratio by weight (A:B) | 10:1 | |||
Handing Curing Time | min | 30 | ||
Initial Curing Time | hour | 2.5 | ||
Full Curing Time | hour | 24 | ||
Tensile Strength | After Curing | Mpa | 0.8 | |
Elongation at break | % | 180 | ||
Hardness | Shore A | 2 | ||
Volume Resistivity | Ω*cm | 1x1015 | ||
Dielectric Strength | KV/mm | 25 | ||
Work Temperature | ℃ | -60~200 |
● Packing:
Ø 22kg/set: A:20kg/bucket, B:2kg/bucket.
● Storage:
Ø Keep it away from children.
Ø Use it in ventilated places
Ø In case of contact with skins, wipe and then flush with clear water.
Ø In case of contact with eyes, flush with clear water immediately and go to hospital
for checking.
Ø Store it in dry and shady places at the temperature of 8~28℃
Ø Storage life: Component A is 12 months, Component B is 6 months from the date of manufacture.