High Speed Slitting Machine Horizontal Type GFTW1200C1, packing machine

Product Description:

Uses:

GFTW1200C is a highly precision, accurate, sensitive, machine for slitting facility. It is suitable for slitting of Pvc, PET etc plastic films, materials and other different types of paper. It performs in stable manner and easy to operate. It Possesses visual, hhigh auto-operation advantages.

Characterisics :  

1) Motor use Finland ABB 5.5 KW Frequency ConverterSpeed Controlling Drive, ABB dedicated Frequency Motor.

2) Japan Agarizaki a complete set of data display list, Display Power and Voltage.

3) Raw material downloading Configuration is Japan Mitsubishi magnetic Powder Actuators(100N.M)-----1 set, Finished Product Configuration is Japan Mitsubishi Magnetic Powder Clutch(100N.M)----- 2 sets.

4) Unwind Configuration SIEMENS Text---- 1 set, Wind Configuration is SIEMENS 5.7 inches Man-Machine Interface-----1 set, Germany TURCK Photoelectric Proximity Switch----2 sets.

5) EPC / LPC System use MITSUHASHI Japan PW-800 E+L System and Remote controller.

6) Taiwan Harden Aluminum Roll.

7) Buffer Roll, Pinch Roll use Pneumatic structure.

8) Type Horizontal, High and Heavy, Complete Machine Case is wallboard structure, stress relief handling.

9) Interchange Cutter Structure, Convenience and fast, shorten transmembrane path, and reduce waste.

10) Unwind is No Mandril , Electric lock, Pneumatic opening and closing, Hydraulic loading material.

11) Wind Configuration mechanical Slip shaft --2 pcs and SMC Japan Precision air converter---2 sets, matching tension control, to reach air pressure automatic controlling, which reflect the perfect match for Slip air inflate axle tension control.

12) Press Film Roll use Pneumatic structure, rise underdraught, Pressure is adjustable alone.

13) This Machine with carbon fiber static elimination brush---3 pcs.

14) Most low voltage electrical of this machine are imported parts.

15) All kinds of fuses—each 2 pcs ; Inside hexagonal----1 set, 4” screwdriver---each 2 pcs.

     φ50×1200,φ50×1000,φ50×800 Press each 2 pcs,

     φ50×700,φ50×500 Press Roll each 1 pc

     Transmission synchronous belt each 1 pc, transmission cone—1 pc

     Handling edge machine----1 pc

     Present carry hydraulic trolley---1 pc

Main technical parameters:

Max. Raw Material Diameter: less than 650mm;

Max. Wind Diameter: less than 650mm;

Max. Slitting Width: 1200mm;

Slitting Finished Products Width: 50mm-1200mm;

Machine Speed: 20-300 m/min;

EPC / LPC Precision: ±0.3 mm (according to the detection line or picture);

Whole Machine Weight: About 5 Tons;

Whole Machine Power: About 8.5 KW;

External Measurement: 1800mm x 2770mm x 1400mm;