Loading Port:China Main Port
Payment Terms:TT or LC
Min Order Qty:1000 meters m³
Supply Capability:500000 per month m³/month
1.Name:wood moulding
2.ISO/FSC certificate
3.Customized design
4.No warp in different temperature
5.Wood:alder, okume ,oak,sapele,cherry.
Manufacturing process of Solid Wood Moulding/Profile
1.Moulding preparation
The wood blanks are maufactured in mouling profiles.
2.Surface sand following moulding preparation, Machined(produced) with high speed planing equipment to yield a premium finish timber moulding ready for priming with a gesso coating.
3.Priming-stage:Mouldings are spray-coated with the 1st application of thin gesso coating.
4.Intermediate sanding stage:Surface sand following priming stage 1
5.Mouldings are spray-coated with the 2st(and final) application of water base primer.
6.Final product check with light sand and buff to the surface,that is readily painted with quality topcoats
Quality standards of Solid Moulding Profile
1.Moisture content must be accurately tested with an electronic moisture meter.
2.All dimensions should be within the dimensional tolerances as specified on the order
3.Coating application would be applied equally on all edges and has a strong adhesion to the wood substrate throug testing .No visible defects like
patching,open finger joints,bleed through,etc,after being coated/primed.
4. Mouldings would stay straight and not have excessive bow or spring.
Packing&Loading
1.All mouldings to be packed in mini-bundles secured with tape, within the main pack structure.
2.Packs will be then strapped securely with poly strapping (to be confirmed by customer) to secure for shipment.
3.All bottom packs are secured to a plywood pallet that allows containerisation and unloading.
Species for Solid Wood Moulding/Profile
Production Progress for Solid Wood Moulding/Profile
Loading for Solid Wood Moulding/Profile