GSK Milling and Drilling Machine CNC Control 980MDa

Product Description:

Detailed Product Description

GSK 980MDa Milling and Drilling Machine CNC Control

1.5 Axis Control

2.2ms interpolation cycle,0.1um precision;

Control Axes

1. Control axes: 5 axes (X, Z, Y, 4th and 5th)

2. Interpolation axes: X, Y, Z, 4th and 5th  linear interpolation; X,Y and Z three axes linear and spiral interpolation, any two axes arc interpolation;

3. PLC control axes: 5 axes

Feeding axis function

1. Minimum command unit: 0.001mm or 0.0001mm can be selected

2. Position command range: ±99999999 × minimum command unit

3. Rapid traverse speed: When the command unit is 0.001mm, the maximum speed is 60m/min; (0.0001mm, the maximum speed is 24m/min)

4. Rapid override: F0, 25%, 50% and 100%, total four levels, real-time adjustment;

5. Feeding override: total 16 levels: 0~150%, real-time adjustment;

6. Interpolation mode: linear, arc and spiral interpolation and rigid tapping

7. Auto chamfering

Acceleration and deceleration function

1. Cutting feeding: Acceleration or deceleration in linear type/index type or front/rear is selectable.

2. Rapid traverse: Acceleration or deceleration in linear type/index type or front/rear is selectable.

3. Tapping: Acceleration or deceleration in linear type/index type or front/rear is selectable.

4. The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.

Spindle function

1. Analog voltage 0V~10V output in two channels, support two-spindle control

2. Spindle encoder feed back in one channel, the resolution of spindle encoder can be set (0 or 100p/r~5000p/r)

3. Transmission ratio between encoder and spindle is:(1~255):(1~255)

4. Spindle speed: It is specified by S code or PLC signal, the speed range is 0rpm~9999rpm.

5. Spindle override: total 8 levels: 50%~120%, real-time adjustment

6. Spindle constant surface speed control

7. Tapping cycle/rigid tapping

Tool function

1. Tool length compensation

2. Tool radius compensation (C type)

3. Tool wearing compensation

4. Tool life management

Precision compensation

1. Backlash compensation

2. Pitch error compensation in memory type

PLC function

1. PLC program in two levels, maximum 5,000 steps, the refresh cycle of the 1st level program: 8ms.

2. PLC program communication download

3. Support PLC warning and PLC alarm

4. Support many PLC programs (maximum 16), the current running PLC program can be selected

5. Basic I/O: input in 40 points/output in 32 points