Gasket O Ring DN600 Factory Quality and Price

Product Description:

1.Description of Gasket :
This gasket is formed with stainless steel 304/316 and graphite,non asbestos,ptfe or other seal material. It is the best gasket for muffler pipe or flang gasket.
It could be standard style,it just formed stainless steel and graphite or non asbestos etc.
It could be add inner ring or outter ring.The material ring  could be carbon steel or stainless steel.

2.Features of Gasket : 
1.A.Wound style gasket consists of four type:basic type,with inner ring,with outer ring,and with inner and outer rings. B.Heat exchanger wound style gasket:basic type and with inner and outer rings.
2. Normally matrial used:
A.Steel tape:08F,0Cr18Ni9(304),0Cr18Ni9Ti,1Cr18Ni9Ti(321),0Cr17Ni12,M02(316),00Cr17Ni14M02(316L).
B.(Cold roll)steel plate for inner and outer ring:Outer ring:mild steel,0Cr13 and 0Cr18Ni9
Inner ring:same as steel t
3.Gasket Images:

4.Specifications of the Gasket:
1.A good compression ratio and elasticity.
2.With plastic appropriate, after pressing can adapt to the sealing surface and sealing surface uneven fill the gap, to ensure good sealing performance with the temperature and pressure in the system of alternating case.
3.With excellent corrosion resistance, not to be damaged in some extreme medium, does not have the expansion and contraction.
4.Under the condition of high temperature softening, does not creep; under the condition of low temperature hardening, does not shrink.
5.Have sufficient strength, when external load conditions, not be crushed; at high temperature, not blown out.
5.FAQ
Ask 1: Why some supplier give me the price much cheaper than you?
Answer:1.They wanna attract your attention,while you contact with them,they would raise the price by any reason.
               2.They willn't provide the high qualities to you cause it had the cheap price.
Ask 2:What the MOQ?
Answer:The MOQ should reach 800 kilograms
Ask 3:Should i pay for it If some product need molds?
Answer:I'm afraid you should pay for it,However,We would return it back when we get the first order.
Ask 4:What's the delivery circle times ?
Answer:About 2 weeks and we would give the accurate time when we know the quantity.