DSOW-100H Double Sided OPP Tape

Product Description:

CONSTRUCTION:

Carrier: OPP film, 25 micron

Adhesive: Solvent based acrylic

Liner: Silicone release PE-coated paper, white colour.

TYPICAL PHYSICAL PROPERTIES:

Total Thickness (adhesives + OPP film): 100 ± 5 micron

Initial Tack (14# steel ball): ≤100 mm

Peel Adhesion (Kg/25mm): 1.6 ± 0.2 Kg

Holding power: ≥ 200 min

PACKING:

Core I.D.: 3” (76mm±1)

Jumbo Roll：1.02 x 1000m

Packaging：Wrapped with corrugated cardboard.

Cut Roll: roll width 3mm up

REMARKS:

1.     The data above are typical results and subject to change without notice.

2.     Tolerance: Weight and Thickness: ±5%; Width: ±5mm;

Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.

3.     The products should be stored at room temperature and be kept away wet and/or heat source.

4.     It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.

5.     The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.