Deep Well Submersible Water Pump With Good Quality

Product Description:

1. Applications:

For water supply from wells or reservoirs. 

For domestic use, for civil and industrial applications. 
For garden use and irrigation.

2. Features of deep well pumps :

1>. 100% copper wire, automatic wiring

2>. Cold-rolled silicon steel sheet, with high-speed punching

3>. 304 Stainless steel welding shaft

4>. Over-current protector imported from Taiwan

5>. C&U bearing ( best bearing of China)

6>. No leakage with the high quality Mechanical seal

3. Operating condition

1>.Water temperature is not more than 35°c

2>.The PH value of water source is 6.5-8.0

3>.Solid content in water not more than 0.01%; diameter of the bigest particle not more then 0.2mm;

4>.Water coolant system

5> Motor ratation speed 2850rpm/min. 

6>. Protective Device grade: IP68

7>.Insulation Grade: F

8>.Minimum water flow required to flow through motor:8cm/s

9>.Maximum Start count per Hour :30 times

10>. Can be installed vertically or horizontally

11>.Flat water proof cable with separate groud wire.

4. Motor Details:

1>.Rewindable motor

 2>.Single phase: 0.37-2.2 kw    220V( ±10%)-50Hz

 3>.Three Phase: 0.37 to 7.5kw  220/380V(±10%)-50Hz;  230/400V ( ±10%)- 50Hz

5. FAQ:

1>Can your pumps mount Eff.1 motors

Currently, only on request though this will shortly be a CNBM standard.

2>Are your pumps protected against dry running?

No, unprotected centrifugal pumps are not generally designed for dry running. It is important to give us or your dealer as much information as possible about the system in which the pump is used. Inlet pressure, the type of liquid to be pumped, together with relative density, viscosity and temperature, for example, are required in order to allow CNBM to recommend the right pump with the right gaskets for a long operating lifetime.

3>How can I get trained on CNBM products?

Yes, we provide training courses in our factory (products, general and specific pump technology, hydraulics, and practical applications). Please consult your sales manager or get in touch with our headquarters for more information.