Loading Port:Shanghai
Payment Terms:TT OR LC
Min Order Qty:5 m.t.
Supply Capability:10000 m.t./month
The base material of polished alu:minum mirror sheet is bare aluminum sheet, then we make a special treatment to the surface of aluminum sheet and stick a layer of high quality reflective material, the production are well and widely used in lights and lampshade line.Application of specular aluminum: Lighting, lampshade, grille, grille ceiling, diffuser of fluorescent lamp, solar energe, etc and Strength of adhesive, meet requirements of GB 2794-81-84).
Reflective aluminum sheet
Mirror sheets
Reflective,clean surface
Reflectivity 86%
1000series,normally 1006
4. Anodized Reflective Mirror Aluminum Sheet Specification:
No. | Test Item | Result |
1 | Pencil Hardness | 2H |
2 | Impact Resistance | Impact failure end point:77.5kg.cm |
3 | Falling Sand Abrasion | Litres of abrasive: 79.0L |
Coating Thickness:1.1mil | ||
Abrasion Resistance: 71.8L/mil | ||
4 | Specific Gravity | 1.344 |
5 | Shear Strength | 21.8MPa |
6 | Heat Deflection Temperature | 114.8 Celcus |
7 | Peel Strength | 0.98kg/mm |
8 | Flexural Modulus | 14060MPa |
9 | Tensile Strength | 35.1MPa |
10 | Elongation at break | 13% |
1.Q: What about leadtime ?
A: Normally the leadtime is 60days after we receive the deposit and confirm the details. All the press machines we use is the best quality in China Yangli brand. The press machine leadtime from Yangli is 50days, the best leadtime we can give is 60days.
2.Q: What's the lead time for moulds?
A: Normally the mould leadtime is 45 days after we confirm all the details with customer. Our professional mechanical enginners from Austria will design the mould according to the samples from customer, or by the specifications offered by customers.
3.Q:What kinds of mould you can make? and what is your strong point for the moulds?
A: we can make wrinkle wall mould and smooth wall mould both. For wrinkle wall mould we can make, 79" pan, fish pan, bbq pan. For smooth wall mould we can make muffin cup, and cake cup, tar cup,etc. We can also make 2 or 3 portion conatiner moulds as long as you offer us sample or specifications. Our strong points are all our moulds are WEDMLS cut, which makes the mould more accurate and precise. Important materials likestainless steel parts we make in Austria. We also recut after heat treatment, which most of makers do not take this process.