AAC Plant for Indian Customers

Product Description:

Aac plant best choice for Indian customers

1.fully automated operating

2.light weight,lowcost,high profit

3.best manufacturer

There are more and more Indian customers tend to build the aac plant, which will be a potential industry in Indian in the near future, and it will also be the emerging industry in the whole world. More earlier you start, more profit you will get and more market you will get. Our company can make the equipment configuration and provide the free technical support according to customers' different requirements.

1.AAC Production Line Introduction

    AAC block (light brick ) is the light and porous buidling material. It has light keeping temperature cant burn and other advantages.it can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),they could be used industry building and common building.they are more and more popular in the world.

2.AAC Production Line common  conception

     Common concrete density is usually 1600-2400kg/m3,but Areated concrete are 500kg/m3,600kg/m3,700kg/m3.It has not the big grain,main use silicon material (for example:coal ash,sand,stone dust and others ),through making the material small for example sand,they can be used directly if has enough degree of small (for example coal ash.Mixing  calcium material lime cement water to a special slop,then add the aluminum dust and the additive.Make the aluminum dust and the special slop have a Chemical reflect.then produce Hydrogen to make the concrete slop to expanding or swell,foam.Next,put them into the curing room to concreting cutting steaming curing,last,there will bacome the light brick,the porous rate is 70-80%.

3.AAC block Advantages

    * light weight

    * Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and  1/5 common concrete.So use the Light brick can reduce the weight of the build more,and also reduce the  beam of roof and pillar press best.then you can see,it can save the material and cost,it also fighting shaking.

    * keeping temperature

     * It has many are porous,the delivery hearting coefficient is 0.9-0.22W/(mk),the same as  1/4 or 1/5 of clay brick,so it is best  materials now in the world.

     * have many kinds material,have lowest waste

Main Material:coal ash sand waste mine material coal stonestone dust and other silicon materials.

We can supply our customer for designning, production, installation, commissioning, training and good after-sale service.

Capacity: from 20000 cubic meter to 300,000 cubic meters per year.

Equipments: stocking raw materials, mixing, molding, forming, cutting, evaporating and curing, crane cramp, transporting etc.,

1   Product weight is according to 600kg/m3 to control.

2   annual capacity 200,000M3.

3   set raw  material proportion: cement 6.5%, raw lime 23%, flyash 68%, gypsum 3%, aluminum paste powder 350g/M3.

4   water and material rate 0.631

5  one mould product 2.88M3

6  Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes.

Reference: cement is 42.5 Portland or 42.5 common cement

Aluminum power paste calculate to use according to 600kg/m3

Remark: the accurate batching rate is adjustable according to the raw material locally